Energy Monitoring

ENERGY MONITORING AND CONTROL UNIT (EMCU)

Multi-channel Energy Saving System

Remote Monitoring and Controlling

Ethernet/GSM Communication

RT-EMCU-XXEGSXDX-00

Energy Monitoring and Control Unit (EMCU) is a device which constantly monitors and controls individual power consuming loads. This device is integrated with Energy Monitoring Software(EMS), part of our Central Monitoring and Management Software(CMMS) The power parameters i.e. Energy, Voltage, Current, Power, Power factor and environment parameters i.e. Temperature, Lux and Humidity are monitored and managed.

The user has the following benefits

  • Energy Saving.
  • Energy Monitoring.
  • Remote control/management.
  • Failure detection alerts.
  • UPS backup duration update.
  • Centralized data for optimization.

Details:

  • Rugged powder coated Metallic enclosure.
  • 3 output channels (1 Slave Card), expandable up to 12 channels (4 Slave card).
  • Measures and monitor the AC voltage, Current, Power, Frequency, Power factor, and the energy values of all individual Output Channels.
  • Each channel detects the failures of equipment, based on the current sensing and reports to EMS.
  • Measurement and monitoring of UPS output A.C voltage and battery DC voltage.
  • Analog Inputs like Temperature, Humidity and Light are monitor and measured using efficient sensors with 2% accuracy which helps in reducing energy consumption thereby reducing utility cost and Increasing energy efficiency.
  • Option to make the system to bypass upon switching OFF the system, where electrical lines will work in manual mode but continue monitoring action without automation / Control.
  • System tampering is sensed and communicated to the users/management.
  • Communication through Ethernet with the Energy Monitoring Software (EMS) and GSM communication (optional).
  • Onboard RTC for maintaining the schedule timings of energy saving controls.
  • Metering extremely accurate and high-speed event capture information which log 100 latest events in the internal memory.
  • LED indications for communications, Zones alert, UART communication, controller to controller communication.
  • 6 digital input for general purpose sensors is used for different alert settings.
  • 1 digital output for router reset.
  • EMCU shall be connected either to three phase or single phase supply voltage.
  • 2 X 16 LCD with Scroll switch for event display and event verification.
  • Input supply of 230V 50Hz / 120V 60Hz
  • Power consumption of 15W or lower.
  • Optional Battery Backup.
  • Optional GSM.

Banks / ATM’s / Retail / Showrooms / Server rooms / Malls / Food courts / Offices / Commercial buildings / Residential buildings.